Lecture references

Lecture 1: courses.ece.ubc.ca/elec401/notes/eece488_set1_2up.pdf

Basic elec fundamentals
www-inst.eecs.berkeley.edu/~ee40/fa03/lecture/lecture02.pdf

www-inst.eecs.berkeley.edu/~ee40/fa03/lecture/lecture03.pdf

Current,  voltage,  power, capacitor, inductors, kcl,  kvl, superposition theorem, diode, cmos inverter characteristics.


Iiitd.edu.in/~mshashmi/CMOS_2016/index.html
egr.msu.edu/classes/ece410/salem/lectures.html

Network Theory Lectures
https://ocw.mit.edu/courses/electrical-engineering-and-computer-science/6-002-circuits-and-electronics-spring-2007/index.htm

http://rfic.eecs.berkeley.edu/ee100/refs.html

VLSI Conference Lists

• http://www-ece.engr.utk.edu/~bouldin/MUGSTUFF/HTML/allcal.html
• http://www.iitg.ernet.in/stud/shirshendu/conferences.php
• http://www.cse.chalmers.se/research/group/vlsi/conference/
• http://vlsiconference.com/
• http://www.eng.auburn.edu/~agrawvd/CONF/conf.html

Water Purifier Links

http://gadgets.shiksha/top-three-best-water-purifier-in-india-for-home-use.html#
http://www.techulator.com/experts/740-What-difference-between-RO-UV-water-purifier.aspx
http://www.indiahometips.com/buying-water-purifier.html
https://www.quora.com/What-is-the-best-water-purifier-available-in-India

http://www.kent.co.in/RO-Water-Purifiers/Kent-Pearl
http://www.kent.co.in/RO-Water-Purifiers/Kent-Supreme

Home Loan Calculator Links.
http://emicalculator.net/
http://emicalculator.net/home-loan-emi-calculator

One of my fav quotes.
Really looking out for doing work which i like.

Reference clock spurs of the PLL.
http://cds.linear.com/docs/en/application-note/AN143f.pdf
https://digital.library.adelaide.edu.au/dspace/bitstream/2440/80592/3/02whole.pdf

Budget laptops

• what are the various budget laptops in range 30k to 40k?
• chosen dell, lenovo and hp laptops.
• take a look at this look: https://computerslaptops.knoji.com/top-laptops-comparison-lenovo-vs-hp-store-vs-dellcom/
• differences between various dell series laptops?
• http://www.pcadvisor.co.uk/reviews/laptop/3502508/dell-inspiron-15r-5537-review/
• http://forums.anandtech.com/showthread.php?t=2282747
• http://www.pcworld.com/article/2465363/dell-inspiron-15-5000-series-review-this-15-inch-notebook-disappoints.html
• http://www.compuindia.com/laptops-ultrabooks/new-inspiron-15-354254500iblu.html
• 
  
• differences between various lenovo series laptops?
• http://www.dwsurfshop.com/lenovo-laptops-thinkpad-ideapad-essential/
• http://www.brighthub.com/computing/hardware/articles/65600.aspx
• http://forum.notebookreview.com/lenovo/546877-difference-between-g-z-series.html
• differences between various hp series laptops?
• http://www.hpshopping.in/HP_Pavilion_15-p036tu_Notebook_PC_Laptop
• http://www.hpshopping.in/HP_Pavilion_15-p001tx_Notebook_PC_Laptop
• http://www.flipkart.com/hp-15-p036tu-notebook-4th-gen-ci5-4gb-1tb-win8-1-g8d91pa/p/itmdxnhk3zhfvhcv?pid=COMDXNHGHFXAVHCX&otracker=from-search&srno=t_5&query=HP+Pavilion&ref=c8b950fe-9334-4069-be5f-c7f5984d8012
• lenovo laptops
• http://www.flipkart.com/lenovo-ideapad-s510p-59-383309-laptop-4th-gen-ci5-4gb-500gb-dos/p/itmdtaqahbjgx7yf?pid=COMDTAQ22QMWGJR9&otracker=__compare_Lenovo_Ideapad_S510p(59-383309)_Laptop_(4th_Gen_Ci5%2F_4GB%2F_500GB%2F_DOS)
• http://www.flipkart.com/lenovo-essential-g580-59-358263-laptop-3rd-gen-ci5-4gb-500gb-dos/p/itmdcjhugdtpfzrk?pid=COMDGSR6RUYFGEGH&srno=b_10&ref=7cca2f58-5b85-49f4-9a62-9429828e52be
• http://www.flipkart.com/lenovo-z50-70-notebook-4th-gen-ci5-4gb-1tb-free-dos-59-419432/p/itmdy3y7nfuvjqff?pid=COMDY3Y2HNEZVV5Y&srno=b_6&ref=8cb58832-ac88-4a51-b60b-572eb34263ae
• http://www.flipkart.com/lenovo-ideapad-s510p-59-383309-laptop-4th-gen-ci5-4gb-500gb-dos/p/itmdtaqahbjgx7yf?pid=COMDTAQ22QMWGJR9&srno=b_4&ref=8cb58832-ac88-4a51-b60b-572eb34263ae
• 
  

Opamp Compensation

• Opamp
• Why compensation?
• how to start compensation for new designer?
• Compensation techniques...
• Important Links and Glossary.

Opamp:

Dont know why it is called Operational amplifier??? It is upto the reader to answer this question.

Opamp(Operational amplifier in short) realized with basic differential amplifier. Differential amplifier contains an gain transistors, load and tail current source. Basic differential amplifier is shown below:

Load can be resistance, diode connected mos, current source or any other combination of these.

Amplifier gain and bandwidth depends on what factors? 

What are the issues with the differential amplifier? Is the gain sufficient? If connected in closed loop does it operate correctly?

Lets assume that the opamp as a black box and has the following characteristics:

• Two inputs and one output.
• High input impedance.
• High Voltage Gain.
• Low output impedance.

Opamp input-output characteristics are defined by gain plot in dB and phase plot. Gain is Output voltage by input differential voltage. This plot is defined assuming Opamp operating in linear region i.e., output varies linearly with input.

Opamp most commonly used for signal conditioning, buffers, amplifiers etc. In most of these applications, the opamp is placed in negative feedback mode. what is negative feedback? Interms of voltage, if output voltage or part of output voltage is fedback and connected to the negative input of the opamp then its in negative feedback mode. Quite a few engineers end up in connecting the circuit wrongly and end up complaining that the Opamp is not working and output is always high or low. whenever we are using opamp in closed loop always check the opamp input output connections properly.

Now again we go to gain plot and phase plot. Gain plot means open loop gain of opamp across frequency. generally gain plot is in dB and typical gain of opamp at DC is 40dB(100) to 80dB(1000). gain plot generally rolls of at 20dB/dec from the 3dB bandwidth of the open loop gain, At Unity gain frequency Open loop gain falls to 0dB.

Add plot here

Few PLL Documents for freshers

• http://ece.wpi.edu/analog/resources/PLLTutorialISSCC2004.pdf

This document is by Dennis Fischette, which gives an overview of PLL and PLL internal blocks.
Basic circuits used and different architectures of each circuit.

• http://www.rfdh.com/ez/system/db/pds_tn/upload/57/PLL_performance,_simulation_and_design.pdf

Above book is by Dean Banerjee. This will explain PLL in terms of control system point of view. It explains about 2nd order PLL, 3rd order PLL etc. This will be helpful in building a matlab phase domain model for PLL.

Further notes on PLL will be added.

Intel developed 1-16Gbps Serdes in 14nm Intel process. They made it in tri-gate intel process. Anxious to listen what other companies are doing in 14nm process in serdes and high speed interface space.
Read eetimes link related to this.
http://www.eetimes.com/document.asp?doc_id=1321621

Few links related to high speed serdes and multi-protocol serdes
 https://www.semiwiki.com/forum/content/3240-does-multiprotocol-phy-ip-really-boost-ttm.html
https://www.semiwiki.com/forum/content/2168-rare-earth-syndrome-phy-ip-analogy.html

IP business: https://www.semiwiki.com/forum/content/2965-what%92s-new-%93interface-ip-survey%94.html

Semiwiki is a good website for IC Designers to learn what is going on in IC design world.

Conference and Journal Links

ISSCC (International Solid-State Circuits Conference) www.isscc.org/isscc
VLSI Circuits Symposium www.vlsisymposium.org
CICC (Custom Integrated Circuits Conference) www.ieee-cicc.org
ASSCC (Asian Solid-State Circuits Conference) www.a-sscc.org
ESSCIRC (European Solid-State Circuits Conference) www.esscirc.org
JSSC (IEEE Journal of Solid-State Circuits) www.sscs.org/jssc.htm
TCAS-I (IEEE Transactions on Circuits and Systems - I) http://tcas1.polito.it/
TCAS-II (IEEE Transactions on Circuits and Systems - II) http://tcas2.polito.it/
TPE (IEEE Transactions on Power Electronics) http://www.ewh.ieee.org/soc/pels/publications/transactions.php

Bhagavadgita in Telugu by Ghantasala

Listen these videos. Very useful for all individual especially for Gult.
http://www.youtube.com/watch?v=J7MaYgFrh0E&list=PLCBF670EFDB682D8C&index=8&feature=plpp_video

Google Maps Navigation

Google maps navigation has come to India. Please check these links to know more.

http://www.google.com/mobile/navigation/

http://googleindia.blogspot.in/2012/09/navigation-and-traffic-data-come-to.html

Analog IC Designer

Analog IC Design Engineer


What does an Analog IC Designer is expected to know?

Most of the major companies will expect you to know the basics of analog circuits. If  we take an example of fresher or 1or 2 year experience , since he might not have industry experience, so companies expect him to know the basics thoroughly. So if you are a fresher, doesn’t have any IC design experience(just coming out of University), it is better to join as an intern to get some experience. Analog IC Designer is expected to know the following topics thoroughly:

Ø  RC/RL Circuits: RC/RL circuits, step response, impulse response, ramp response, response for pulse signal, steady state response, poles and zeroes, magnitude transfer function, phase transfer function, series and parallel combination of RC circuits and their step response.

Ø  RLC circuits: LC oscillation, series and parallel resonance, step response, impulse response,  Quality factor, Bandwidth, Impedance, Admittance.

Ø  MOS: current and voltage transfer characteristics, manufacturing process, moscap, dc characteristics, gm, gds, gmb, fc cutoff frequency, common source/drain/gate amplifiers, cascode amplifier, gain, bandwidth, poles and zeroes in amplifiers, source degeneration, noise, small signal analysis.

Analog Interview Questions I

2. Find the voltages Vs, Vi and Vo in the circuit below

Solution:

Current I in the circuit is constant, so voltage across capacitor increases linearly with the slope I/C. voltage across resistor R is IR. So voltage Vi in the above circuit is Vi=IR + I/C*t.

Next question is very simple 

       3. A simple RC circuit is given with an impulse voltage signal at the input, plot the voltage across resistor and capacitor. Find the current waveform?

     Solution: 

      For ideal impulse voltage signal, voltage across capacitor is zero always. But voltage across resistor is same as impulse signal and current in the circuit is similar to ideal impulse I=Vin/R.. 

      But let us think about a practical impulse signal with finite pulse 'tw' and amplitude Vm. So the voltage across resistor and capacitor at t=0+ is Vm and 0. The voltage across capacitor increase with time constant RC during pulse 'tw', for time t>tw, impulse falls to zero so the capacitor will discharge to zero from the voltage it has charge earlier.Current I in the circuit is similar to VR except it is scaled by R i.e., I=VR/R

   
      4.  Given a simple RC circuit, find the voltage across resistor and capacitor for the ramp input with a slope k.    Find the current waveform in the circuit?
      Solution:
      Initially Vo=0V, so for a given ramp input since input is zero initially Vo will be zero. How should we analyse for inputs other than step? For any RC circuit, if current is finite, voltage across capacitor cannot change instantaneously. For ramp input initial current is zero since Vi is zero at t=0, so capacitor cannot charge so Vo is zero at t=0.
      Now as input increases, current tries to increase, so voltage across capacitor also increases but slowly since current is very small initially. Voltage across resistor is VR=IR. Current increases to a point when the slope of the output is equal to slope of the input, so that current is constant and is given by (Vo-Vi)/R.

       If you solve the differential equation for the RC circuit with ramp input you will get the above equations.
       In the figure below, current waveform is not given, since it is similar to voltage VR, except scaled by R i.e,         I=VR/R

       In the next post we will discuss RL circuit, which are similar to RC circuit, but lot of people get confused whenever they see inductor. We will find simple way of analyzing RL circuits. we will discuss important points about RC/RL circuits.

http://www.ee.ucr.edu/~rlake/EE135/Fuding_Ges_Guide.html
http://stevenic.blogspot.in/2010/04/some-on-site-interview-questions-fuding.html

http://stevenic.blogspot.in/search/label/Analog%20IC%20design

Blogging Tips for Beginners: Convert Word doc to Blogger Post

I happen to listen to Darren Rowse and few others in youtube regarding blogging tips for beginners. Whatever you write should contain  Good Content. Good Content is a content which will educate reader or  solve reader's problem or entertain reader. Try to read ugly truths of blogs for beginners 

I was writing a post on a vlsi circuit which included pictures and equations. I had problems in converting a word document to blog post especially equations are not copied properly. I have found few methods to do this which might be helpful to convert word doc to blogger post

1. Open a word file, select the data you want to copy, right click and copy. Now go to edit posts in blogger and paste it where you want. This process will copy data but equations and figures or pictures are not copied. This method of converting word doc to blogger post lose figures and equations.

Voltage References Basics

Voltage reference is a reference voltage Vref stable against process, voltage and temperature. Voltage reference is a basic block used in analog/mixed signal Integrated Circuit(IC) and radio frequency ICs. Voltage reference is used in DC-DC converter, power management circuits, ADC and DAC. So there are more than one voltage reference designed in an analog/mixed signal IC. The design of voltage reference is very important because the accuracy of the voltage reference decides the accuracy and performance of the whole system.

For example, in a voltage regulator the line regulation is one of the important specifications. Line regulation refers to variation in output voltage with the variation in input supply voltages. In a voltage regulator, a voltage reference is generated and is multiplied by a specific ratio to get the regulated output voltage. So if the voltage reference doesn’t vary with the input supply voltage, then the regulated output voltage doesn’t vary with supply voltage. So the accuracy of the output voltage is decided by the accuracy of the reference voltage.

For the figure shown below, 

If VREF changes, then VOUT changes by  1+ R1/R2, so there is a gain from VREF to VOUT. If VOUT specification is 2.5V ± 1%. Then ∆VOUT = ±25mV. If VREF=1.2V and changes by 100ppm/C i.e., For change in temperature of 100C, Vref=1.2±1.2×100×1e-6×100=1.2±0.012V. Let  1+ R1/R2=2.1, then VOUT changes by 2.5±0.0252. From the above example, the accuracy of the VREF decides the accuracy of the regulator output voltage VOUT.

Low power Voltage Reference

Voltage Reference is a circuit which generated a stable reference voltage across Process, Voltage and Temperature. Generally, Analog circuits such as DC-DC converters, power management circuits, Analog to Digital Converters require a stable voltage reference circuit with a tight specification for voltage variation in the range of 4ppm/C. Most of the voltage references used in analog circuits are Bandgap voltage reference circuits. Bandgap Voltage reference circuits generate a stable reference voltage of 1.2V. Since Silicon Bandgap energy is 1.12eV, so the circuit is called Bandgap reference. 

Bandgap Reference

Bandgap reference can be generated by adding positive temperature coefficient voltage with the negative temperature coefficient voltage to cancel the effect of temperature. In CMOS technology, negative tempco voltage can be generated with a PNP/NPN transistor VBE voltage and positive tempco voltage can be generated using the difference of two VBE voltages(VBE1-VBE2)

VREF= VBE2 + (VBE1-VBE2)

VBE1 = VT*ln(Jc/Jc0),

where  VT is the Volt equivalent of temperature,

Jc is the collector current density,

Jc0 is the reverse saturation current density

Basic bandgap reference voltage circuit is shown in the figure below:

Figure 1: Bandgap Voltage Reference

Q1 is PNP transistor and Q2 are N such PNP transistors

In the above circuit, I1 = (VEB1-VEB2)/R1 = VT * ln(N)

So, VREF = VEB2 + (VEB1-VEB2)/R1* R2

Reference Voltage, VREF = VEB2 + VT * ln(N) * R2/R1

The above Bandgap voltage reference circuit requires an opamp which requires and additional current, so for low power voltage reference circuit(current less than 100nA),  the circuit given below can be used. The reference voltage can be designed with negative tempco of Vbe of PNP transistor and positive tempco of Vt(thermal voltage). The transistors in this circuit should be in subthreshold region. The challenge in this design is to get a reference voltage less than 1V with low current across process

Figure 2: Low power Voltage Reference

Meditation

Meditation is keeping our mind calm and peaceful

http://www.how-to-meditate.org/why-learn-to-meditate.htm/

Wi-Fi

Wi-Fi means Wireless Fidelity, this abbreviation is used just for publicity

Actually Wi-Fi represents a wireless standard IEEE 802.11. Wi-Fi enabled device will follow this standard to connect wireless router/wireless area network.

Wireless router:

It acts as a network switch to connect various devices to the network

It allows connection to the wide area network(WAN) internet

To connect the wireless devices in the network

To know more about Wi-Fi read:

http://www.howstuffworks.com/wireless-network1.htm